Alexander SumnerUpgrading your home usually comes with a long checklist, especially when you need fixtures that look sharp and keep everyone safe.
Maybe you’re swapping out a wobbly deck banister or adding sleek metal steps to your storefront. Either way, finding the best railing in Philadelphia makes a real difference.
I did the legwork and researched the top local ironworks shops to find metal fabricators with excellent craftsmanship.
If you’re planning a bigger remodel, it helps to also line up reliable renovation contractors to keep the whole project moving.
How much does a railing cost in Philadelphia?
A railing in Philadelphia usually runs about $50 to $120 per linear foot for basic wrought iron, climbing to $150 to $200 or more per foot for custom or ornate work.
| Railing Type | Estimated Cost (Per Linear Foot) |
| Basic Wrought Iron | $50 to $120 |
| Custom or Ornate Fabrication | $150 to $200+ |
1. ATA Iron Works
Website: ata-ironwork.com
Address: 5224 Greene Street
Contact: 267 333 5787 | 267 331 6590
Hours: Monday to Friday, 8:00 AM to 4:30 PM; Saturday, 9:00 AM to 4:30 PM
Finding a shop that shapes metal to your exact property lines can be tough, but ATA Iron Works builds custom ornamental iron pieces for unique home needs. They use time-tested methods to make durable boundary railings and custom staircases.
You can pick from a wide range of looks, from classic historical patterns to clean modern lines.
They’re also great at coordinating with other crews if you need a concrete contractor to pour a fresh patio foundation first.
However, since everything is built from scratch to fit your design, the turnaround is naturally a bit longer than grabbing pre-made pieces off a shelf. That extra wait is worth it for a setup that matches your home perfectly.
Could not be more satisfied
ATA Ironworks is a great business to work with. I had an old rusty iron railing replaced. They were polite and professional. Sam was quick to respond by email and text. He gave me a very competitive quote and a reasonable time frame to complete the work. The crew that came to install the railing was also very kind and professional. They worked quick and cleaned up the site when they were done. I could not be more satisfied with the results.
Denny Daniel | Google Review
2. Drews Custom Ironworks
Website: drewsironworks.com
Address: 2001 N 19th St
Contact: 215 247 7703
Hours: Monday to Friday, 8:00 AM to 5:00 PM; Saturday, 9:00 AM to 2:00 PM
Humid local weather means your outdoor metal fixtures need extra defense against moisture. Fortunately, Drews Custom Ironworks builds custom interior and exterior ironwork from heavy-duty steel treated with a damp-location primer to fight rust.
I talked with Rob, the owner, who walked me through how their thick coating holds up against heavy seasonal storms.
They also handle full on-site installation so your setup stays secure, and they can recreate historic designs in solid steel for older homes.
The one downside is that their initial repair estimates rely entirely on you texting over photos. So the final project cost might shift a little once they assess the damage in person.
Drews did a fantastic job
Excellent quality & service. Years later we are still very happy. Needed a railing to match our existing porch railing. Drews did a fantastic job on a job in the front of our home & in the back. Very professional. Recommend highly.
lyndaloo9 | Google Review
3. Colonial Iron Works
Website: colonialiron.net
Address: 5031 Lancaster Avenue
Contact: 215 879 5850
Hours: Monday to Friday, 9:00 AM to 5:00 PM
Supporting neighbourhood shops matters to a lot of people, and Colonial Iron Works, a fourth-generation family business, fits the bill.
The crew does every step of the metalwork right on site to keep quality tight.
They also offer powder coating and paint to give your railing a tough outer shield, and they’re good at fixing up old wrought iron that has started to rust.
You can reach out for a free quote on a job of any size.
However, one catch is that they serve a wide area, all the way into South Jersey. So you might hit a delay if their crews are tied up out of town.
My hand-railing looks amazing
Joe was amazing! Very good at communicating with me and worked around my schedule. My hand-railing looks amazing and exactly as we described. Within a week and a half he custom made my railing and installed it plus it would have been even sooner if I was free the week he was able to install it. Highly Recommended.
Olivia Jones | Google Review
4. Anvil Iron Works
Website: anviliron.net
Address: 1022-26 Washington Avenue
Contact: 215 468 8300
Hours: Monday to Friday, 7:30 AM to 4:00 PM; Saturday, 8:00 AM to 12:00 PM
Getting a real feel for the metal before you buy makes a big difference, and Anvil Iron Works lets you do just that. I stopped by their showroom last month and loved that I could walk right in, no appointment needed.
They make iron pieces by hand, with a focus on decorative touches that fit your home’s style.
Their team can match almost any iron pattern or build a new one from scratch, and they even offer fast 24-hour repairs if your gate or fence gets damaged.
Just note that they run two shops in different states. That can slow down local installs, depending on where the crew starts out.
The gate turned out just perfect
We want to thank Anvil Iron Works, Bill again. The gate turn out just perfect! It was just the added touch to the front of our home and complemented the original iron railing. Bill was given a piece of paper with an amateur drawing and turn it into a work of art. You know a true craftsman made it by the excellent workmanship. I am sure the guys in the shop helped too. We highly recommend Anvil Iron Works.
Dawn McKillop | Google Review
5. Brown’s Iron Works
Website: brownsironworks.net
Address: 1137 East Chelten Avenue
Contact: 215 849 1499
Hours: Monday to Thursday, [start time unverified] to 4:30 PM; Friday, 8:00 AM to 3:00 PM
If you’re working within a tight budget but won’t compromise on safety, a flexible builder like Brown’s Iron Works is exactly what you need.
This local shop leans into practical safety projects and structural design to find durable metal solutions that fit your budget.
Their crew is experienced with critical pieces like fire escapes and sturdy window guards, and they can manage everything from simple rust repairs to full ornamental redesigns, including traditional porches and spiral staircases.
On the flip side, their heavy focus on classic layouts means they may be less suited to ultra-modern or minimalist styles. So if you want a contemporary look, talk through your exact design ideas with them early to see if they can pull it off.
I had a great experience
I had a great experience working with Brown’s Iron Works. Eulis did an excellent job replacing a broken hand rail at the front of my property. He was professional and friendly. I highly recommend him to anyone looking to replace and/or install an iron railing.
James M.V. Oliverie | Google Review
